...
Configure the following Partitions on the Target Cluster
Partition | Description |
PT_TestmateIncoming | PT_TestmateIncoming |
PT_TestmateOut | PT_TestmateOut |
PT_TestmateDN | PT_TestmateDN |
Configure the Following Calling Search Spaces on the Target Cluster
Calling Search Space | Partition |
CSS_TestmateIncoming | PT_TestmateIncoming |
CSS_TestmateOut | PT_TestmateOut |
CSS_TestmateInternal | PT_TestmateDN |
Configure a new Siptrunk on the Target Cluster
Field | Value |
Product | SIP Trunk |
Device Protocol | SIP |
Device Name | Testmate_Target_source |
Device Pool | default |
Remote-Party-Id | Uncheck |
Asserted-Identify | Uncheck |
InBound Calls – Calling Search Space | CSS_TestmateIncoming |
Sip Destination Address | cucm1.dcloud.cisco.com dest port 5060 |
Sip Trunk Security Profile | Non Secure Sip Trunk Profile |
Sip Profile | Standard SIP Profile |
Create CTI Routepoint on Target Cluster
Field | Value |
Device Name | Testmate_T_RP |
Device pool | Default |
Calling Search Space | CSS_TestmateOut |
Create CTI Routepoint Line 1 on Target Cluster
Field | Value |
Directory Number | 4201 |
Route Partition | PT_TestmateDN |
Alerting Name | +61999994201 |
Calling Search Space | CSS_TestmateInternal |
Display Caller id | +61999994201 |
External Phone Number Mask | +61999994201 |
Create CTI Routepoint Line 2 on Target Cluster
Field | Value |
Directory Number | 4202 |
Route Partition | PT_TestmateDN |
Alerting Name | +61999994202 |
Calling Search Space | CSS_TestmateInternal |
Display Caller id | +61999994202 |
External Phone Number Mask | +61999994202 |
...
Create Translation Pattern on Target Cluster
Field | Value |
Translation Pattern | \+6199999.42XX |
Partition | PT_TestmateIncoming |
Calling Search Space | CSS_TestmateInternal |
Called Party Transformation | PreDot |
...
Create Route Pattern on Target Cluster
Field | Value |
Route Pattern | \+1972555XXXX |
Partition | PT_TestmateOut |
Gateway/Route List | testmate_target_source |
Call Classification | OffNet |
Calling Party Transformation | Ticked Use Calling Party’s External Phone Mask |
Create Application user on Target Cluster
Field | Value |
User id | Testmate_t_jtapi |
Password | dCloud123! |
Available devices | Associate Testmate_T_RP |
Add following Access Control Groups | Standard Audit Users Standard CCM Super Users Standard CTI Allow Call Monitoring Standard CTI Allow Call Park Monitoring Standard CTI Allow Control of All Devices Standard CTI Allow Control of Phones supporting Connected Xfer and conf Standard CTI Allow Control of Phones supporting Rollover Mode Standard CTI Enabled Standard CTI Allow Calling Number Modification |
...
Create Sip Trunk on the Source Cluster
Field | Value |
Product | SIP Trunk |
Device Protocol | SIP |
Device Name | Testmate_source_target |
Device Pool | dCloud-DP |
InBound Calls – Calling Search Space | dCloud_CSS |
Remote-Party-Id | Uncheck |
Asserted-Identify | Uncheck |
Sip Destination Address | cucm-p.dcloud.cisco.com dest port 5060 |
Sip Trunk Security Profile | Non Secure Sip Trunk Profile |
Sip Profile | dCloud Standard SIP Profile |
Create Route Pattern on Source Cluster
Field | Value |
RoutePattern | \+619999942XX |
Partition | dCloud_PT |
Gateway/Route List | testmate_Source_target |
Call Classficaiton | OffNet |
Calling Party Transformation | Ticked Use Calling Party’s External Phone Mask |
Create Application user on Source Cluster.
Field | Value |
User id | Testmate_s_jtapi |
Password | dCloud123! |
Add following Access Control Groups | Standard Audit Users Standard CCM Super Users Standard CTI Allow Call Monitoring Standard CTI Allow Call Park Monitoring Standard CTI Allow Control of All Devices Standard CTI Allow Control of Phones supporting Connected Xfer and conf Standard CTI Allow Control of Phones supporting Rollover Mode Standard CTI Enabled Standard CTI Allow Calling Number Modification |
...
Call the service name Interconnect Service2, Bind to standalone, and press submit.
Confirm you have two interconnect services
...
Create two new CUCM interfaces with the following details
Interface Name | Description |
Testmate_source | 198.18.133.3 |
Testmate_target | 198.18.133.23 |
Click on Interfaces > Add Interface and select CUCM / Cisco Unified Commutations Manager/ CallManager
select CUCM / Cisco Unified Commutations Manager/ CallManager
...
Enter in the details of the Application user created earlier and press use for all interfaces, followed by submit
Interface Name | Ip Address | Username | Password |
Testmate_source | 198.18.133.3 | Testmate_s_jtapi | dCloud123! |
Testmate_target | 198.18.133.23 | Testmate_t_jtapi | dCloud123! |
...
Connect to Workstations 1 and 2 and start each jabber client
First PVT Test Plan
...
Note: you may need to press refresh to get the latest results
Click on the report to produce a detailed test report that can be exported as a CSV or xls.
...
Navigate to the Bulk Administration menu on the Target CUCM
Click Add New
...
Browse to the file tetmatetarget.tar, select import/export as the file type and select the transaction as Import Configuration
...