| Table of Contents | ||||
|---|---|---|---|---|
|
...
Suggested actions required from the issues highlighted in the screenshot above from a Sample Migration. Noting that this is a sample only and issues vary depending on the migrated source clusters configuration
Detected 4 authenticated or encrypted Phone and SIP............ - Solution: load required licences on target cluster
There are 41 CUCM-DEVICE-POOL that are not allocate to site - Solution: As Site allocation has not yet been performed, no action required until post site allocation
There are 26 EM Profiles that are not allocated to a site - Solution: As Site allocation has not yet been performed, no action required until post site allocation
There are 2 x warnings for deprecated devices- Solution: Select the Green button to Skip Deprecated Devices (if Red Button, Disabble Rule and Clear Issue is selected, MA will try and load the deves during load phase and it will fail with error)
Warning, Phone Security Profile "Cisco Webex DX80 - Standard SIP Non-Secure Profile" product modes is not avaliable in target system - Solution: Select Blue Button to Skip loading Security Profile in Target
Warning, Phone Security Profile "Cisco Webex DX80 - Standard SIP Non-Secure Profile" product modes have been renamed........- Solution is to load the device pack on the target cluster + rediscover, or Select Blue Button to Skip loading Security Profile in Target
5 CUCM-CALL-MANAGER customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Call Manager servers can be mapped to the required target CM servers*
9 CUCM-CALL-MANAGER-GROUP customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Call Manager Groups can be mapped to the required CMG’s in target*
1 CUCM-IP-PHONE-SERVICE customer objects that need to be mapped or skipped - Solution: Select the blue button to bring up screen where Source CUCM IP Phone Service objects can be mapped to reqiuired IP Phone Services in target*
14 CUCM-MEDIA-RESOURCE-LIST customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Media Resource Lists can be mapped to the required MRGL’s in Target*
*Will only show if the source and target mapping objects are different. Also note that the target objects must be defined manually in souce cluster prior to starting migration
Sample mapping of CUCM-CALL-MANAGER servers in screenshot below, where the 5 existing source CM servers are mapped to target CM_ucmc6 (selected from drop down) server followed by blue button to Update (Map)
...
Once the above issues have been cleared, proceed to next Tab - Warnings
...
Items that are highlighted under warnings can be missing e164 numbers, Intercom partitions and CSS's, Devices without Lines, Lines without Devices etc. If these require updating, select the blue button which will take you to the item in question. Otherwise, if the issue is expected and no action is required, select the red button to Disable Rule/ Clear the issue.
Once Warnings are resolved, proceed to next Tab - Site Suggestions which is where we create the sites to be used during the migration
Site Allocation
To create a site, select the Green button 'Create Site' adjacent to the suggestions as required
...
Some other mapping samples and outcomes in table below.
Source Object | Mapping | SiteId | Comment |
Dallas DP | ${siteId} DP | Dallas | Site name with space with object acronym removed |
USA_NY_Site | USA_${siteId}_Site | NY | Only captures the name |
USA_NY_Site | ${countryCode}_${siteId}_Site | NY | Captures the name and also provides the country code |
062458 | ${siteId} | 062458 | |
062458 | 062${siteId} | 458 |
Limiting the number of Sites displayed
...
Now we need to rectify the remaining options + new issues occuring post Site allocation
Site XXXXXX requires country code - Solution: Individually select country from Blue Button Drop Down ‘Select Country Code’
Tip - if there are many items the same - as above with Country Code allocation, to save time, use Bulk Change option to update
There are 1 CUCM-DEVICE-POOL that are not allocated to a site. - Solution: Select the ‘View’ to the left of item to bring up link to Object Browser - then allocate this device pool to a site + set Change At to During Site Load as it is now allocated to a site.
...
The reason that this shows up under issues is that this particular DP was not template matched as a Site. Another fix for this could be to add template regex as per Site Suggestions creation above + run Allocation step
There are 5 EM Profiles that are not allocated to a site. - Solution: Select the ‘View’ to the left of item to bring up links to object browser for each of them - then in object browser allocate to site for each individually
...
When All issues are attended to - Re Validate to move on to Clone/ Prepare Step
...
Pre Load Validation Issues
Before the Load step, where all configuration is pushed to Target cluster is performed, there is a validation required that will flag any dependency issues that must be rectified before proceedding proceeding with the load. In the below sample migration, we can see that there are a number of Issues that needs recificationfixing.
To the left of the screen is the item that triggered the issue. Now we need to decide what to do to clear it. If we look at the first line where Device Pool has been identified as belonging to a site has a dependent object that would be loaded at the Before Any Sites Loaded step which will not work.
...