| Table of Contents |
|---|
Wrangler UCMC Settings
...
| Table of Contents |
|---|
Wrangler UCMC Settings
Below are described the UCMC tool global settings. These can generally be left as default but contain some settings that may be useful to change depending on migration requirements, particularly the Mapping Tables that define the Site suggestions for migration
...
| Note |
|---|
These should generally be left as default unless performance issues experienced interfacing with CUCM and/ or UCXN |
...
Setting | Default Value | Description |
|---|---|---|
General Settings | ||
Generate new incremental siteID’s | OFF ON (Default) | Site ID’s number will generate incrementally. If off will leave as Site name |
Workflow Performance Settings | ||
CUCM AXL List Page Size | 150 | Controls size of each page when loading lists of items via AXL. |
CUCM AXL Simultaneous Request Limit | 15 | Controls how many simultaneous requests to send via AXL. Exceeding 24 is not recommended. |
CUCM AXL Simultaneous Write Limit | 2 | Controls how many simultaneous updates to send via AXL. Exceeding 2 is not recommended for low vCPU CUCM clusters. |
Yarnman CouchDB Simultaneous Request Limit | 50 | Controls how many simultaneous requests to send to Couch. Exceeding 200 is not recommended. |
Unity CUPI List Page Size | 200 | Controls size of each page when loading lists of items via Unity CUPI |
Unity CUPI Simultaneous Request Limit | 5 | Sets the amount of objects to be retrieved from Unity/UCXN API calls. |
Unity CUPI Request Timeout (ms) | 30000 | Controls how long to wait for Unity to respond to an API request before triggering a timeout. Exceeding 60s is not recommended. |
Unity CUPI Sync Backoff Time (ms) | 90000 | Controls how long to wait for Unity to retry a sync request after encountering a problem. Only effects sync/discovery requests. |
Unity CUPI Sync Backoff Retry Times | 3 | Sets the amount of times to retry a sync request after the backoff above. |
Maximum validation issue item count | 5000 | Controls the number of entries that can be saved in validation issue task |
Interstep processing pause | 10000 | Controls pause during clone transform process |
UCMC Settings | ||
CDR Repository Path | /var/lib/couchdb/cdr | Local path that CDR folders and files are deposited in. Default is /var/lib/couchdb/cdr These are required if running migration report CDR Dialing Forest |
Mappings
...
Defaults
The Defaults tab defines the default settings that are displayed on the migration initiation screen.
...
The Clusters menu item displays information regarding the Source and Target Cluster interfaces and servers
...
Selecting the MainTargetCluster link displays information re the target cluster.
...
If we now add a new template to try and match the DP that was not matched in original run, then Save and Preview, we can now see that the Device Pools match the new template.
...
Target Mappings WxC-DI
Select Target Mappings menu item to view the status of all objects. The Target Mappings are divided into four object types:
...
Map types are objects that must be mapped from source to target clustter. The types show objects in Unmapped, Mapped, Skipped, Loaded state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Map Types (mandatory mappings) section under Source Cluster Objects, Unmapped, Customer headings and cannot progress until all mappings performed.
...
Objects can also be set to skip using bulk change from v2.5.15 by setting the targetId to Skip
...
Schema
Templates
Selecting Templates from the menu will display all templates in the schema used for the current migration. The templates define what treatment will be performed on a type of object during the migration.
The Name column contains the name of the individual templates that may be opened by selecting the same
Source Type column displays the source type of the corresponding template
The Group column displays the type of dialplan the template applies to
Country column specifies if the template applies to a particular country or any
ApplyOn clumn displays if template applies to Target or Source
Apply Every column displays the rule for where the template applies
To view or modify a template, select the link in the Name column which will bring up the detail of the Template in question. Here the template can be modified and a preview on the outcome of template be performed by selecting the Preview Template Button to verify the expected outcome prior to migration or for troubleshooting. If a template is modified here, using Override Template, this modification is only valid for current migration
...
Call Types
Call types specifies all the different Global call types used in the Wrangler UCMC dial plan.
| Note |
|---|
It is not advisable to modify or add to this unless advised by support |
...
Objects
Browse
...
...
To view a specific object select Edit link corresponding to the specific Object. To modify an object, specify the override value in the Override Value column corresponding to the parameter to be altered, then save
...
Target Mappings WxC-MT
Select Target Mappings menu item to view the status of all objects in a WxC-MT migration. The Target Mappings are here divided into:
Mappings
Multi-Tenant Transforms
Skipped Types
Skipped Objects
Mappings
Mappings are objects that must be mapped from source to target. The types show objects in Waiting, Skipped, Issues and Mapped state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Mappings section and cannot progress until all mappings performed.
Multi-Tenant Transforms
These shows the status of objects that are transforming from CUCM format to WxC-MT format
Skipped Types
These how types of objects that don’t have any mappings in the particular migration
Skipped Objects
Shows specific objects with no target mappings in the migration
Schema
Templates
Selecting Templates from the menu will display all templates in the schema used for the current migration. The templates define what treatment will be performed on a type of object during the migration.
The Name column contains the name of the individual templates that may be opened by selecting the same
Source Type column displays the source type of the corresponding template
The Group column displays the type of dialplan the template applies to
Country column specifies if the template applies to a particular country or any
ApplyOn clumn displays if template applies to Target or Source
Apply Every column displays the rule for where the template applies
To view or modify a template, select the link in the Name column which will bring up the detail of the Template in question. Here the template can be modified and a preview on the outcome of template be performed by selecting the Preview Template Button to verify the expected outcome prior to migration or for troubleshooting. If a template is modified here, using Override Template, this modification is only valid for current migration
...
Call Types
Call types specifies all the different Global call types used in the Wrangler UCMC dial plan.
| Note |
|---|
It is not advisable to modify or add to this unless advised by support |
...
Objects
Browse
The Object Browser can be accessed from menu by selecting Objects → Browse and isan essential tool during the migration process as it displays the status of and is used to display and modify any of the objects that are being migrated. A specific object can be searched for using the Search box where the object name or part of it can be entered. It is also possible to narrow down the view by using the filters.
...
To view a specific object select Edit link corresponding to the specific Object. To modify an object, specify the override value in the Override Value column corresponding to the parameter to be altered, then save
Below screenshot shows the detail for CUCM/WxC-DI object
...
Below screenshots show WxC-MT objects detail in tabs rather than WxC-DI/CUCM single page above- Under Data tab configuration may be changed/overridden , then saved
...
History & Sync tab details the migration change history for the object
...
Allocation Tab shows site allocation details for the object
...
The change tab displays the change steps that will be executed during load or manually using Preview Execute
...
The Dependencies & Dependents tab lists all dependencies and links to these objects
...
Mappings tab displays the CUCM to WxC-MT object mapping
...
Additions
The Objects->Additions menu item provides a facility to manually add an object for loading into target UC clusters using the + Create New Object button
...
The Ignoring Rules report will show any Rules that have been selected to be ignored post validation steps. Individual ignored rules may be investigated by selecting the Edit link adjacent to object in question which will show detail view of it in the Object Browser. The report may be Exported using the Export link in top right hand corner above of the table
...
Menu item Objects → Users Missing Email displays any users that are missing Email, Select the link to individual user to bring up Object Browser with more detail and to resolve as required. The report may be Exported using the Export link in top right hand corner above of the table
...
Menu item Dialplan → Configuration allows for configuration changes to Dial plan default settings
...
Item | Values | Description |
|---|---|---|
Schema Configuration | ||
Target Schema | Default Schema <Custom Schemas> | Select schema to use. Default Schema or any created custom schemas |
Target Dialplan | HcsDialPlan-T4 simplifiedDialplan | Select dialplan to use for Template Migration |
Dialplan Configuration | Push Dialplan From Template Clone Source Dialplan Use Existing Dialplan / Do No…. | Selection of migration model |
Transform Templates & Clone Settings | ||
Update matching LDAP users | Update or Create Create Only | Assert Option for LDAP users in target CUCM cluster |
Update Matching Objects | Update or Create Add | Assert optin for all transform objects except users in target CUCM cluster |
Default Migraton Point/ Change-At-Settings | ||
Generated Dialplan Objects - Customer | Before Any Sites Loaded (Default) During Site Load After All Sites Loaded | Stage that Dialplan objects are loaded |
Generated Dialplan Objects - Site | Before Any Sites Loaded During Site Load (Default) After All Sites Loaded | Stage that Dialplan objects are loaded |
Generated Cloned Objects - Customer | Before Any Sites Loaded (Default) During Site Load After All Sites Loaded | Stage that Dialplan objects are loaded |
Generated Cloned Objects - Site | Before Any Sites Loaded During Site Load (Default) After All Sites Loaded | Stage that Dialplan objects are loaded |
Generated Transformed Objects - Customer | Before Any Sites Loaded (Default) During Site Load After All Sites Loaded | Stage that Dialplan objects are loaded |
Generated Transformed Objects - Site | Before Any Sites Loaded During Site Load (Default) After All Sites Loaded | Stage that Dialplan objects are loaded |
Prefix Templates | ||
Customer Prefix | C${customerid} (Default) | This will be used before many objects from the template. ${prefix}-PT / ${prefix}-CSS >> C01-PT C01-CSS |
Site Prefix | C${customerId}S${siteIndexPadded2Char} (Default) | This will be used before many objects from the template. ${prefix}-PT / ${prefix}-CSS >> C01S01-PT C01S01-CSS |
General Configuration | ||
Source Directory URI Partition | Directory URI (Default) | This is used for filtering and matching the Directory URI partition in some circumstances. |
*There are additional values available to select in the Default Migraton Point/ Change-At-Settings Values column but only the most common selections shown here.
...
The Number Ranges → DN report shows all discovered DN ranges/ site and size of the range> to Edit a range, select the Edit Range link adjacent to the corresponding DN range.
...
The Number Ranges → E164 report shows all discovered E164 ranges and DN range/ site and size of the range. to Edit a range, select the Edit Range link adjacent to the corresponding DN range
...
Phones meeting the criteria will be displayed, individual phones may be unselected by selecting the Selected link adjacent to the phone.
...
The details of each task may be viewed by selecting the corresponding Completed link.
...
From the detail, the Events tab may be selected which will display all the events and errors pertaining to the task
...