| Table of Contents |
|---|
Wrangler UCMC Settings
...
The Clusters menu item displays information regarding the Source and Target Cluster interfaces and servers
...
Selecting the MainTargetCluster link displays information re the target cluster.
It is not recommended to change any value in the Cluster or other tabs here unless advised to by support
...
WxC-MT
...
Sites are used to group the various configuration objects within the source cluster and are also selected for the migration batches
Site can be added manually or by using the site suggestions method.
The Sites menu item displays the sites that have been defined, and additionally allows for the creation of new sites as required
...
The Name Column displays the site name - to view and modify Site details, select the individual site name
The Select column allows for the selection/ deselection of sites to be migrated
The Group column allows for grouping of sites, which is required to run an Inter Dependency Report. This is described further under Reports below
The Bulk Select button allows for the bulk selection/ deselection of sites to be migrated
The Create New Site button allows for the creation of a new site manually
Countries
The Countries menu option allows for the view, add or modification of country details pertinent to countries where migrating sites resides. These settings are used for site country allocation
...
Select the country from the Identifier column to view and edit country specific details
...
Mapping Tables
The Mapping Table option within the migration allows for the change of mappings on a per migration basis, then preview to check if the defined templates generate site suggestions as required. To check site suggestions for a particular mapping table option - select Preview table adjacent to required mapping source - in the below sample, we select Preview Table adjacent to Device Pools, although any of the Objects in the Name column can be used to generate sites.
TIP - Device Pool is generally the best object to create sites
...
Here we can see the Object Name (Device Pools in Source) and the Template/s that provides the match. We can also see that there is one objet name that is not matching a template - ‘Sel-Prov-DP’.
...
To create a template that matches the Device Pool, select the Device Pools link as highlighted in screenshot below which will open the mappings table.
...
If we now add a new template to try and match the DP that was not matched in original run, then Save and Preview, we can now see that the Device Pools match the new template.
Licenses
A default license must be defined for WxC-MT migration. The Licenses menu option displays defined default licenses for the current migration, and allows for the addition of new or removal of previously defined default licenses.
To add a default license, select from drop down, followed by +Add
To remove displayed license/s - select the X in red box adjacent to the license
...
Roles
The Roles menu option allows for the addition of required/ removal of previously defined WxC-MT Roles for the migration by selecting Roles to be added from the drop down followed by the +Add button and/or the removal of previously defined Roles for migration by selecting the X in Red Box
...
Sites
Sites are used to group the various configuration objects within the source cluster and are also selected for the migration batches
Site can be added manually or by using the site suggestions method.
The Sites menu item displays the sites that have been defined, and additionally allows for the creation of new sites as required
...
The Name Column displays the site name - to view and modify Site details, select the individual site name
The Select column allows for the selection/ deselection of sites to be migrated
The Group column allows for grouping of sites, which is required to run an Inter Dependency Report. This is described further under Reports below
The Bulk Select button allows for the bulk selection/ deselection of sites to be migrated
The Create New Site button allows for the creation of a new site manually
Countries
The Countries menu option allows for the view, add or modification of country details pertinent to countries where migrating sites resides. These settings are used for site country allocation
...
Select the country from the Identifier column to view and edit country specific details
...
Mapping Tables
The Mapping Table option within the migration allows for the change of mappings on a per migration basis, then preview to check if the defined templates generate site suggestions as required. To check site suggestions for a particular mapping table option - select Preview table adjacent to required mapping source - in the below sample, we select Preview Table adjacent to Device Pools, although any of the Objects in the Name column can be used to generate sites.
TIP - Device Pool is generally the best object to create sites
...
Here we can see the Object Name (Device Pools in Source) and the Template/s that provides the match. We can also see that there is one objet name that is not matching a template - ‘Sel-Prov-DP’.
...
To create a template that matches the Device Pool, select the Device Pools link as highlighted in screenshot below which will open the mappings table.
...
If we now add a new template to try and match the DP that was not matched in original run, then Save and Preview, we can now see that the Device Pools match the new template.
...
Target Mappings WxC-DI
Select Target Mappings menu item to view the status of all objects. The Target Mappings are divided into four object types:
...
Map types are objects that must be mapped from source to target clustter. The types show objects in Unmapped, Mapped, Skipped, Loaded state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Map Types (mandatory mappings) section under Source Cluster Objects, Unmapped, Customer headings and cannot progress until all mappings performed.
...
Mappings are objects that must be mapped from source to target. The types show objects in Waiting, Skipped, Issues and Mapped state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Mappings section and cannot progress until all mappings performed.
...
To view a specific object select Edit link corresponding to the specific Object. To modify an object, specify the override value in the Override Value column corresponding to the parameter to be altered, then save
Below screenshot shows the detail for CUCM/WxC-DI object
...
WxC-MT Object Browse Specifics
Below screenshots show WxC-MT objects detail in tabs rather than WxC-DI/CUCM single page above- Under Data tab configuration may be changed/overridden , then saved
...
The Ignoring Rules report will show any Rules that have been selected to be ignored post validation steps. Individual ignored rules may be investigated by selecting the Edit link adjacent to object in question which will show detail view of it in the Object Browser. The report may be Exported using the Export link in top right hand corner above of the table
...
Menu item Objects → Users Missing Email displays any users that are missing Email, Select the link to individual user to bring up Object Browser with more detail and to resolve as required. The report may be Exported using the Export link in top right hand corner above of the table
...
To download the report, select the Download XLSX Report button
...
...
Numbers
Number Mappings
Displays all Infra Numbers with detail displaying the Source Object (with Link to Object detail), Allocated Site, Migration Status, Type (Title), DN, DN Path, E164, E164 Path, CC, Area and Mapped Target
...
MT Location Numbers
Displays all WxC-MT numbers. By selecting the Edit Number link adjacent to each number, the Infra-source number of each item may be viewed and modified as required
...
DN
The Number Ranges → DN report shows all discovered DN ranges/ site and size of the range> to Edit a range, select the Edit Range link adjacent to the corresponding DN range.
...
The Number Ranges → E164 report shows all discovered E164 ranges and DN range/ site and size of the range. to Edit a range, select the Edit Range link adjacent to the corresponding DN range
...
Phones meeting the criteria will be displayed, individual phones may be unselected by selecting the Selected link adjacent to the phone.
...
The details of each task may be viewed by selecting the corresponding Completed link.
...
From the detail, the Events tab may be selected which will display all the events and errors pertaining to the task
...