| Table of Contents | ||||
|---|---|---|---|---|
|
Wrangler WxC-
...
DI Migration Assistant – Migration Tips & Hints
During a clone migration, the process goes through some high level steps during which issues may be encountered that needs resolving. These high level process steps are
...
Detected 4 authenticated or encrypted Phone and SIP............ - Solution: load required licences on target cluster
There are 41 CUCM-DEVICE-POOL that are not allocate to site - Solution: As Site allocation has not yet been performed, no action required until post site allocation
There are 26 EM Profiles that are not allocated to a site - Solution: As Site allocation has not yet been performed, no action required until post site allocation
There are 2 x warnings for deprecated devices- Solution: Select the Green button to Skip Deprecated Devices (if Red Button, Disabble Rule and Clear Issue is selected, MA will try and load the deves during load phase and it will fail with error)
Warning, Phone Security Profile "Cisco Webex DX80 - Standard SIP Non-Secure Profile" product modes is not avaliable in target system - Solution: Select Blue Button to Skip loading Security Profile in Target
Warning, Phone Security Profile "Cisco Webex DX80 - Standard SIP Non-Secure Profile" product modes have been renamed........- Solution is to load the device pack on the target cluster + rediscover, or Select Blue Button to Skip loading Security Profile in Target
5 CUCM-CALL-MANAGER customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Call Manager servers can be mapped to the required target CM servers*
9 CUCM-CALL-MANAGER-GROUP customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Call Manager Groups can be mapped to the required CMG’s in target*
1 CUCM-IP-PHONE-SERVICE customer objects that need to be mapped or skipped - Solution: Select the blue button to bring up screen where Source CUCM IP Phone Service objects can be mapped to reqiuired IP Phone Services in target*
14 CUCM-MEDIA-RESOURCE-LIST customer objects that need to be mapped or skipped. - Solution: Select the blue button to bring up screen where Source CUCM Media Resource Lists can be mapped to the required MRGL’s in Target*
*Will only show if the source and target mapping objects are different. Also note that the target objects must be defined manually in souce cluster prior to starting migration
Sample mapping of CUCM-CALL-MANAGER servers in screenshot below, where the 5 existing source CM servers are mapped to target CM_ucmc6 (selected from drop down) server followed by blue button to Update (Map)
...
Once the above issues have been cleared, proceed to next Tab - Warnings
...
Items that are highlighted under warnings can be missing e164 numbers, Intercom partitions and CSS's, Devices without Lines, Lines without Devices etc. If these require updating, select the blue button which will take you to the item in question. Otherwise, if the issue is expected and no action is required, select the red button to Disable Rule/ Clear the issue.
Once Warnings are resolved, proceed to next Tab - Site Suggestions which is where we create the sites to be used during the migration
Site Allocation
To create a site, select the Green button 'Create Site' adjacent to the suggestions as required
...