Versions Compared

Version Old Version 3 New Version Current
Changes made by

Zane England

Glen Steedman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

Ensure that strong passwords are used for local accounts

  1. Create second Administration Application service

    Image Modified

  2. Configure Administration application

    Image Modified

    1. Set the service name to Administration App - Local User to identify this is the local auth DB service

    2. Set the node/arm

    3. Set the host to the ip address of the node or 0.0.0.0 to bind to all IP addresses

    4. Set the port - this is the port that will be used to connect to the local admin access in this example 3999 was used

    5. Set the authentication policy as required

  3. Via SSH allow HTTP access to the port defined above adjust the port as set in the administration application configuration

    1. Photon yarnman

      1. Code Block
        sudo ym-edit-config.sh enable-local-admin-access

    2. legacy yarnman

      Code Block
      yarnman@yarnman:~$ sudo ufw allow 3999
Rule added

  4. Verify access to the administration application - Note that https must be used

    Image Modified