This lab guide is for use with the yarnlab dCloud for wrangler_ “Webex Dedicated Instance (DI) Wrangler tool (partnering with Yarnlab)” https://dcloud2-rtp.cisco.com/content/demo/915839 (note that it is availible in other regions also)
The test_mate lab guide below uses the same VM but you do not have to complete the wrangler_ lab as a prerequsite to this lab
| Table of Contents |
|---|
Test_mate PVT
...
Note: It's recommended to have a remote session with ad1 to perform Test_mate configuration in firefox. Once Test_mate is controlling the Jabber phones, wkst1 and wkst2 will be displaying screen pops and playing sounds.
CUCM Configuration
| Info |
|---|
Note that configuration is require for both the source and target cluster We have prepared a BAT file that automates much of the target cluster configuration but this can also be done manually The source cluster needs to be done manually |
CUCM configuration using BAT
Optional use of the import/export function within CUCM to load most of the config required on the Target Cluster. Use Workstation 2, which will have the tar file named testmatetarget.tar
| View file | ||
|---|---|---|
|
The Import/Export file contains the following.
Partitions
Calling Search Spaces
Route and Translation pattern
Sip Trunk
CTI route point*
Note: There is a known issue with the Importing of CTI Routepoints with DN’s in cucm 12; you will need to manually add the DN’s to the route point device and create the Application user.
Navigate to the Bulk Administration menu on the Target CUCM
...
Click Add New
...
Browse to the file tetmatetarget.tar, select import/export as the file type and select the transaction as Import Configuration
...
Once the file has been updated, navigate to the Import/Export menu in Bulk Administration and select Import.
...
Select the file that was uploaded
...
Press Select all to check all the configuration items and select Run Immediately before pressing Submit.
...
Verify the configuration items have been added to the Target CUCM
...
, and continue by manually adding the Route point DN’s and application user
Manual Configuration for target cluster
Configure the following Partitions on the Target Cluster
...
Field | Value |
User id | Testmate_s_jtapi |
Password | dCloud123! |
Add following Access Control Groups | Standard Audit Users Standard CCM Super Users Standard CTI Allow Call Monitoring Standard CTI Allow Call Park Monitoring Standard CTI Allow Control of All Devices Standard CTI Allow Control of Phones supporting Connected Xfer and conf Standard CTI Allow Control of Phones supporting Rollover Mode Standard CTI Enabled Standard CTI Allow Calling Number Modification |
yarnman/test_mate Configuration
Configuration of Yarnman Admin Interconnects
...
Connect to Workstations 1 and 2 and start each jabber client
First PVT Test Plan
...
Note: you may need to press refresh to get the latest results
Click on the report to produce a detailed test report that can be exported as a CSV or xls.
...
Testmate instruction jabber to create a 3-party conference with another Jabber endpoint and a PSTN endpoint
...
CUCM Target bulk load files
Optional use of the import/export function within CUCM to load most of the config required on the Target Cluster. Use Workstation 2, which will have the tar file named testmatetarget.tar
| View file | ||
|---|---|---|
|
The Import/Export file contains the following.
Partitions
Calling Search Spaces
Route and Translation pattern
Sip Trunk
CTI route point*
Note: There is a known issue with the Importing of CTI Routepoints with DN’s in cucm 12; you will need to manually add the DN’s to the route point device and create the Application user.
Navigate to the Bulk Administration menu on the Target CUCM
Click Add New
...
Browse to the file tetmatetarget.tar, select import/export as the file type and select the transaction as Import Configuration
...
Once the file has been updated, navigate to the Import/Export menu in Bulk Administration and select Import.
...
Select the file that was uploaded
Press Select all to check all the configuration items and select Run Immediately before pressing Submit.
...
Troubleshooting
...
...
The calls are not working.
Check SIP Trunk on the source cluster is showing Full Service
...