Phased Migration Recommended Object Changes Pre Prepare Step
- Mats Age
- 1 Overview
- 1.1 Object Change 1
- 1.2 Object Change 2
This process is relevant for migration up until and including 2.6.13, from 2.6.14, follow process here in stead https://yarnlab.atlassian.net/wiki/x/B4Bvy
Overview
When performing a phased migration, it is recommended that a number of object types are changed to NOT be site specific. This will minimise any issues encountered during a phased migration prepare step due to dependency issues,
These changes are best performed, using Bulk Change, after site allocations and initial validations but before the prepare migration step.
Note that these objects below are recommendation only and there may be other objects that should be included/ removed for specific migrations
Object Change 1
The following objects are recommended to be moved to the BASL (Before Any Sites Loaded) step and Site Allocation set to NULL
these objects will be loaded to target WxC-DI cluster before the first site specific objects.
CUCM-LOCATION
CUCM-REGION
CUCM-CSS
CUCM-ROUTE-PARTITION
CUCM-TRANSLATION-PATTERN
CUCM-CALLED-PARTY-TRANSFORMATION-PATTERN
CUCM-CALLING-PARTY-TRANSFORMATION-PATTERN
CUCM-VOICEMAIL-PILOT
CUCM-VOICEMAIL-PROFILE
To perform this step - select Bulk Changes, then
+Create Bulk Change
Select the object types in Filters Box that should be changed, then the Source Cluster from Filter by Cluster followed by Search & Find Objects
When searched objects displays - note that this search may be slow on large systems.
select Next
On the page displayed - scroll down to Edit Overrides, from Allocated Site, select Set to “null” and Change At select Before Any Sites Loaded then scroll up and select Review Bulk Changes - Followed by Apply Bulk Changes
Object Change 2
The following Objects should be moved to BASL (Before Any Sites Loaded) step and Site Allocation left as is
CUCM-ROUTE-PATTERN
CUCM-ROUTE-GROUP
CUCM-ROUTE-LIST
CUCM-SIP-TRUNK
CUCM-DEVICEPOOL
To perform this step - select Bulk Changes, then
+Create Bulk Change
Select the object types in Filters Box that should be changed, then the Source Cluster from Filter by Cluster followed by Search & Find Objects
When searched objects displays - note that this search may be slow on large systems.
select Next
On the page displayed - scroll down to Edit Overrides, from Change At select Before Any Sites Loaded then scroll up and select Review Bulk Changes - Followed by Apply Bulk Changes