Wrangler Settings

Below are described the UCMCwrangler_tool global settings. These can generally be left as default but contain some settings that may be useful to change depending on migration requirements, particularly the Mapping Tables that define the Site suggestions for migration

Settings

General settings define global performance metrics and other global settings.

Mappings

Defaults

The Defaults tab defines the default settings that are displayed on the migration initiation screen.

• Default Schema gives option to select any custom schemas that may have been created for migration

• Target Dialplan defines what Default Dialplan to be displayed when using Template Dialplan migration

• Dialplan Configuration defines what dialplan migration option is displayed by default when initiating Migration

• Default Countries gives option to add countries to be added by default during migration

Prefix Templates settings defines the prefixes for Dialplan objects when using Template Migration only

• Customer Prefix defines the prefix for multiple dialplan objects deployed for Template Migration only

• Site Prefix defines the prefix for multiple dialplan objects deployed for Template Migration only

Mapping Object Defaults

The Mapping Object Default Matrix defines source data objects mapping to target data objects. These should be left as default

Mapping Tables

Mapping Tables contain Templates that are used to determine Sites during the Site allocation migration step. These regexes can be modified as required to correctly match source cluster settings required to create site suggestions during the migration. Note that these are global settings, but they can also be modified on a migration specific basis during the migration. This is described under migration process chapter.

Mapping Regexes define the source template objects, the siteId Source template regex is used to define the site for the Site Suggestions in the migrations

All the other Mapping templates, Device Pools, Regions, Locations etc., use the Mapping regexes to determine the Site Suggestions

Source Type Actions

Depending on the dial plan migration option the CUCM configuration objects will be migrated using one of the four functions.

These options can also be overridden if required for any object type

The option for each object is either

• Clone (object will be cloned in target)

• Map (the object will be mapped to target configured object)

• Transform (the object will use transform template to update or add fields on an object)

• Skip (the object will not be migrated)

Site Suggestions

Site Suggestion work in conjunction with Mapping Tables to define specific conditions to be met for creating sites. In example as per screen shot below, it is specified that Device Pools are mandatory for site suggestions and that there needs to be a minimum of 1 template match to create a site suggestion.

Schemas

Schemas contain templates defining how objects are treated during a migration. The initial installation contain a Default schema, but customised schemas might be imported and used if required.

Customer

The Customer Screen display enables information regarding the customer to be added and modified as and if required in the Override Value column, then Save Changes

Clusters

The source and target clusters are automatically defined after discovery for single source and target cluster migration.

The Clusters menu item displays information regarding the Source and Target Cluster interfaces and servers

Selecting the MainTargetCluster link displays information re the target cluster.

WxC-MT

Licenses

A default license must be defined for WxC-MT migration. The Licenses menu option displays defined default licenses for the current migration, and allows for the addition of new or removal of previously defined default licenses.

To add a default license, select from drop down, followed by +Add

To remove displayed license/s - select the X in red box adjacent to the license

Roles

The Roles menu option allows for the addition of required/ removal of previously defined WxC-MT Roles for the migration by selecting Roles to be added from the drop down followed by the +Add button and/or the removal of previously defined Roles for migration by selecting the X in Red Box

Sites

Sites are used to group the various configuration objects within the source cluster and are also selected for the migration batches

Site can be added manually or by using the site suggestions method.

The Sites menu item displays the sites that have been defined, and additionally allows for the creation of new sites as required

The Name Column displays the site name - to view and modify Site details, select the individual site name

The Select column allows for the selection/ deselection of sites to be migrated

The Group column allows for grouping of sites, which is required to run an Inter Dependency Report. This is described further under Reports below

The Bulk Select button allows for the bulk selection/ deselection of sites to be migrated

The Create New Site button allows for the creation of a new site manually

Site may also be Imported and Exported in CSV format for bulk updates of details, this is particularly useful when many sites for Grouping sites and also for adding Address details that are required for WxC-MT migrations as can be seen in below screenshot

Countries

The Countries menu option allows for the view, add or modification of country details pertinent to countries where migrating sites resides. These settings are used for site country allocation

Select the country from the Identifier column to view and edit country specific details

Mapping Tables

The Mapping Table option within the migration allows for the change of mappings on a per migration basis, then preview to check if the defined templates generate site suggestions as required. To check site suggestions for a particular mapping table option - select Preview table adjacent to required mapping source - in the below sample, we select Preview Table adjacent to Device Pools, although any of the Objects in the Name column can be used to generate sites.

Here we can see the Object Name (Device Pools in Source) and the Template/s that provides the match. We can also see that there is one objet name that is not matching a template - ‘Sel-Prov-DP’.

To create a template that matches the Device Pool, select the Device Pools link as highlighted in screenshot below which will open the mappings table.

If we now add a new template to try and match the DP that was not matched in original run, then Save and Preview, we can now see that the Device Pools match the new template.

Target Mappings WxC-DI

Select Target Mappings menu item to view the status of all objects. The Target Mappings are divided into four object types:

●   Map Types

●   Transform Types (only for Template and Map migration option)

●   Clone Types

●   Skip Types

You can view the details of each object for each type.

Map Types

Map types are objects that must be mapped from source to target clustter. The types show objects in Unmapped, Mapped, Skipped, Loaded state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Map Types (mandatory mappings) section under Source Cluster Objects, Unmapped, Customer headings and cannot progress until all mappings performed.

The mappings can be done from the prompts during migration, or from selecting Target Mappings, then selecting the object link here

Select the highlighted item from the Type column, to view the details of the object type. In the screenshot below the CUCM-REGION object is shown. From the screen we can see the umapped objects in yellow background and the mapped objects in green background

Use filters to limit the view as required. For example, to map New1-REG, enter Ne in Search source/ target name … filter box which will limit the view to only include New1-REG, we can then select available target objects from the Target Object drop down. In this instance we can see that only Default Region exist in target cluster. If we want to map New1-REG Region in source to Default region in target, we select Blue Box Update 1 Objects, then OK.

If many source objects to be mapped to a single target object, then use the filter boxes to limit the source objects as required, then slect Target object + Update X Objects.

If there are objects that should not be migrated, from the target object drop down, select Skip Target Binding

Transform Types (only shows in Map or Template Migrations)

Transform Types are objects that are transformed during a Map or Template migration where the object needs to be transformed such as for example if a partition changes between source and target, all the objects that use that partition will be transformed to use the new target partition

As per the Map types, the Transform Types shows the migration status summary of all transform objects, Waiting, Transformed, Skipped and Moved state.

Clone Types

Clone Types are objects that are cloned from source to target

As per the Map types, the Clone Types shows the migration status summary of all clone objects, Waiting, Transformed, Skipped and Moved state.

Skip Types

Skip types are objects that are skipped in the migration

Objects can also be set to skip using bulk change from v2.5.15 by setting the targetId to Skip

Target Mappings WxC-MT

Select Target Mappings menu item to view the status of all objects in a WxC-MT migration. The Target Mappings are here divided into:

• Mappings

• Multi-Tenant Transforms

• Skipped Types

• Skipped Objects

Mappings

Mappings are objects that must be mapped from source to target. The types show objects in Waiting, Skipped, Issues and Mapped state. During a migration you will be prompted to map the objects that are currently unmapped, all of these are highlighted in Yellow in Mappings section and cannot progress until all mappings performed.

Multi-Tenant Transforms

These shows the status of objects that are transforming from CUCM format to WxC-MT format

Skipped Types

These how types of objects that don’t have any mappings in the particular migration

Skipped Objects

Shows specific objects with no target mappings in the migration

Schema

Templates

Selecting Templates from the menu will display all templates in the schema used for the current migration. The templates define what treatment will be performed on a type of object during the migration.

• The Name column contains the name of the individual templates that may be opened by selecting the same

• Source Type column displays the source type of the corresponding template

• The Group column displays the type of dialplan the template applies to

• Country column specifies if the template applies to a particular country or any

• ApplyOn clumn displays if template applies to Target or Source

• Apply Every column displays the rule for where the template applies

To view or modify a template, select the link in the Name column which will bring up the detail of the Template in question. Here the template can be modified and a preview on the outcome of template be performed by selecting the Preview Template Button to verify the expected outcome prior to migration or for troubleshooting. If a template is modified here, using Override Template, this modification is only valid for current migration

Call Types

Call types specifies all the different Global call types used in the Wrangler UCMC dial plan.

Objects

Browse

The Object Browser can be accessed from menu by selecting Objects → Browse and is an essential tool during the migration process as it displays the status of and is used to display and modify any of the objects that are being migrated. A specific object can be searched for using the Search box where the object name or part of it can be entered. It is also possible to narrow down the view by using the filters.

To view a specific object select Edit link corresponding to the specific Object. To modify an object, specify the override value in the Override Value column corresponding to the parameter to be altered, then save

Below screenshot shows the detail for CUCM/WxC-DI object

WxC-MT Object Browse Specifics

Below screenshots show WxC-MT objects detail in tabs rather than WxC-DI/CUCM single page above- Under Data tab configuration may be changed/overridden , then saved

History & Sync tab details the migration change history for the object

Allocation Tab shows site allocation details for the object

The change tab displays the change steps that will be executed during load or manually using Preview Execute

The Dependencies & Dependents tab lists all dependencies and links to these objects

Mappings tab displays the CUCM to WxC-MT object mapping

Additions

The Objects->Additions menu item provides a facility to manually add an object for loading into target UC clusters using the + Create New Object button

The Change column shows the status of object with a green tick indicating that it has been migrated OK. A + sign or Update sign indicates that the corresponding object has not been added or updated in the Target cluster. If the object is selected it will bring up the Object Browser for the item with more detail for further investigation.

Moves & Renames

The Objects->Moves & Renames menu item will display all objects with an option to Ignore (do not move) or to map

Select the objects that should be modified, then modify as required and Save Changes

Configure Actions

The Objects->Configure Actions menu item will display the action taken for a particular object type during the migration being

• Clone - the object being cloned from source to target

• Map - The object is mapped from source to target object

• Skip - The object is not being migrated

Clones & Transforms

The Objects → Clones & Transforms menu displays all objects that have been Cloned & Transformed. The top right of the screen shows if any objects with issues. Filters can be used to narrow down the displayed objects. If the object is selected it will bring up the object summary detail screen with a link to Object Browser for the item with more detail for further investigation.

Dialplan

The Objects → Dialplan report displays all Dialplan objects status when performing a Template Dial plan migration. The Status column shows the current status of each objects. A Green tick adjacent to object means that it has been loaded OK. Any objects with a + Sign has not been loaded. To investigate a Dialplan object, select it from the Object column which will bring up a detailed view in the Object Browser.

SIP Trunks

Menu item Objects - > SIP Trunks will show an SIP trunk includd in the migration. Select the Edit link adjacent to SIP trunk to watch detail for the trunk in Object Browser.

Ignoring Rules

The Ignoring Rules report will show any Rules that have been selected to be ignored post validation steps. Individual ignored rules may be investigated by selecting the Edit link adjacent to object in question which will show detail view of it in the Object Browser. The report may be Exported using the Export link in top right hand corner above of the table

Users Missing Email

Menu item Objects → Users Missing Email displays any users that are missing Email, Select the link to individual user to bring up Object Browser with more detail and to resolve as required. The report may be Exported using the Export link in top right hand corner above of the table

Dialplan

Configuration

Menu item Dialplan → Configuration allows for configuration changes to Dial plan default settings

*There are additional values available to select in the Default Migraton Point/ Change-At-Settings Values column but only the most common selections shown here.

Routing Analysis - Future Option

The Dialplan → Routing Analysis selection will provide a Routing Analysis of Dialplan filtered as required on

• Site

• DN range

• Issues for Update

• Find All for Update

To download the report, select the Download XLSX Report button

Numbers

Number Mappings

Displays all Infra Numbers with detail displaying the Source Object (with Link to Object detail), Allocated Site, Migration Status, Type (Title), DN, DN Path, E164, E164 Path, CC, Area and Mapped Target

MT Location Numbers

Displays all WxC-MT numbers. By selecting the Edit Number link adjacent to each number, the Infra-source number of each item may be viewed and modified as required

DN

The Number Ranges → DN report shows all discovered DN ranges/ site and size of the range> to Edit a range, select the Edit Range link adjacent to the corresponding DN range.

An individual DN range may be added by selecting the + Add DN Range button

DN ranges may be bulk changed by selecting the Bulk Change/Edit DN Ranges button, then select Download XLSX report, modify as required, then upload the modified report using the Upload XLSX Report selection

To download the report, select the Download XLSX Report button

E164

The Number Ranges → E164 report shows all discovered E164 ranges and DN range/ site and size of the range. to Edit a range, select the Edit Range link adjacent to the corresponding DN range

An individual DN range may be added by selecting the + Add E164 Range button

DN ranges may be bulk changed by selecting the Bulk Change/Edit DN Ranges button, then select Download XLSX report, modify as required, then upload the modified report using the Upload XLSX Report selection

To download the report, select the Download XLSX Report button

To download the report, select the Download XLSX Report button

Invalid E164s

The Number Ranges → E164 report shows all invalid E164 ranges discovered

To download the report, select the Download Report button

Conflicts

The Number Ranges → Conflicts report shows conflicting E164, DN and range size conflicts

To download the report, select the Download Report button

Transformation

Renumbering - this feature enhanced in version 2.5.20

The Transformation → Renumbering option allows for the transformation of existing individual numbers or number ranges as part of the migration and should be performed post prepare step and prior to load as it can only be applied to target objects

Select +Create Renumbering Plan

Enter Pattern Start and Range Size (1,100,1000 supported), then populate filter boxes as required including what type of devices in range to exclude from renumbering, enter New DN and New E164 Mask followed by Search & Find Objects

All impacted numbers and associated will display. Object types can be unselected if required, also any individual item can be unselected by selecting Transform toggle adjacent to the item. When all adjusted as required, select Apply Renumbering

Reports

Step Changes

The Reports → Step Changes report provides a report providing all changes performed in each migration step

To initiate, select Generate Step Changes Report which will generate a report that may be downloaded by selecting the link, then opened in Excel. The individual steps changes may be viewed by selecting relevant tab.

Orphaned Objects

The Reports → Orphaned Objects report is initiated by selecting Generate Orphaned Objects which will generate a report that may be downloaded by selecting the link, then opened in Excel. The individual orphand object types may be viewed by selecting relevant tab.

Service & Enterprise Settings

The Reports → Service & Enterprise Settings report is initiated by selecting Generate Service & Enterprise Settings which will generate a report that may be downloaded by selecting the link, then opened in Excel. The Service & Enterprise Settings may be viewed by selecting relevant tab.

CSS Usage

The Reports → CSS Usage option will generate a report on CSS usage in the source cluster that may be downloaded and viewed in Excel. There are individual Tabs for CSS Usage Objects, CSS Usage and Unused CSSs

Dialing Forest

Uses the dialling forest DA dump from DNA to compare the source and target dial plans to ensure all patterns are present. To generate the report from menu, select Reports → Dialing Forest then select Generate

Report may be downloaded by selecting the link and may also be viewed by selecting the Report X tab

Expand as required

CDR Dialing Forest

Extracts dialling patterns from CDR for cross reference to ensure historical patterns dialled are available on the target cluster. Select Reports → CDR Dialing Forest then select Generate to run the report. Noting that there must be a CDR file loaded to server in CDR path (path may be found in Settings)

Reconcile Clusters

The Reports → Reconcile Clusters report initiates a report to reconcile any differences between the source and target clusters

the report may be run for specific sites, Migration points or complete reconcile

Select Source & Target Objects to view differences

Dialplan Connections

Select Generate Dialplan Connections to generate Dial Plan Connections report. When completed select the link to download the Excel spreadsheet

Inter-Site Dependancies

New feature in 2.5.15

Select Inter-Site Dependancies, press generate and select the site group to generate Inter-Site Dependancies report. When completed review the results

Example report with inter-site issues

To view the issues click on view dependants and either adjust the object allocation or site group

Example report with no inter-site issues

Duplicates Objects

This menu item allows for bulk update of object migration status. Any objects that are flagged as duplicate issues during the migration can be bulk updated here. There are four tabs

• Source duplicates on Primary Key - these are objects flagged as identical duplicates for consolidation, where the 2 (or more) source clusters have objects with same primary key and identical configuration

• Source duplicates with unique configuration - these are objects where 2 or more source clusters have same name primary key but different configuration

• Target duplicates on Primary key - these are duplicate objects between source and target with identical configuration

• Target duplicates with unique configuration - these are duplicate objects between source and destination, but with different configuration

select required tab with data, then select action for the object groups using check box and if consolidating clusters select the Source Cluster object to use or for duplicates between source and target Ignore Source to keep object in target unchanged or Update Target Object to update target with source configuration, then select the Bulk Update button to perform the change

Bulk Changes

Bulk Change

Bulk changes may be used to bulk change objects in Wrangler or to create a Migration point Change

To perform a Bulk Change of objects select Bulk Changes from Migration Plan menu, then + Create Bulk Change

Select the object or objects to bulk change, select the cluster and any filter required, then select Search & Find Objects

Any objects matching search criteria will be displayed. To remove a row, right click on row, then select Remove Row

Select Next

On the next screen perform changes as required, then select Review Bulk Changes

Specifically to skip objects for migration, - select Skip from targetId drop down as per below screenshot

The Review screen will be displayed. If as required, select Apply Bulk Changes, changes may be previewed by selecting Preview Change

Migration Change Point

The migration change point provides a way to run in isolation any specific work flow task based on the migration change point and optional Site(s)

It can also be used for roll back of configuration

To Create a Migration point change point, select Bulk Changes from Migration Plan menu, then Create a Migration point change.

Select the Change Point to perform the change at, select Execute. If change should be forced irrespoective of errors encountered, select the corresponding checkbox to YES, then select Start Migration Point Bulk Change to perform the change

ITL Reset

Reset

The Wrangler UCMC tool includes a tool to reset ITL certificates on phones to enable registration of end devices in target cluster*

From Menu select ITL Reset → Reset, then select the cluster from which the devices ITL reset should occur, then select the site and if required model of phone, then select Load Phones

Phones meeting the criteria will be displayed, individual phones may be unselected by selecting the Selected link adjacent to the phone.

When ready, select Run ITL Reset which will reset the certificates on the selected end devices

ITL Scripts

The ITL Reset → ITL Scripts menu item will display a list of end device types. To view the ITL or CTL reset script for a particular phone model, select the adjacent ‘Eye’

The Script for the end device will be displayed. The default model scripts can not be modified, but may be duplicated to create a copy that can then be modified as required

On the duplicate, modify actions as required, then select Update after which the created modified script may be used

The created duplicate will be displayed

Rules

Imported data from source clusters are validated against preset validation rules. These rules may be enabled or disabled by selecting Rules from the menu, to disable or enable individual rules, select the relevant check box - YES enables the rule, NO disables the rule

Tasks

The Tasks menu item will display all the individual task steps that have been performed by Wrangler UCMC. Additionally, tasks include an option to Delete or Reset current Migration.

The details of each task may be viewed by selecting the corresponding Completed link.

From the detail, the Events tab may be selected which will display all the events and errors pertaining to the task

To Delete current Migration in Wrangler UCMC, select Delete Migration.

To Reset the current migration, select Reset Migration. This will delete the current migration data, but keep the selected source and target cluster and migration mode ready for restarting it from the Migration main menu